Post Tagged with: "Arduino"

  • ROBOTC For Arduino is Out Now!

    ROBOTC For Arduino is Out Now!

    ROBOTC May 11, 2012 21:41 12 comments

    You can now download version 3.12 of ROBOTC which also supports the Arduino, in addition to the already existing platforms such as NXT and Cortex!  This is a beta release, and if you install it, it will replace whatever version you already have. I’ve never had major issues with betas […]

     
  • New from OpenElectrons: NXShield-D

    New from OpenElectrons: NXShield-D

    Arduino November 3, 2011 13:10 no comments

    OpenElectrons, the non-NXT company of Mindsensors, has released a smaller version of their NXShield-M that fits a normal Arduino Duemilanove or Uno.  This one doesn’t have as many servo connections as the NXShield-M (which has an insane number of servo connectors) but has a smaller form factor. You can attach […]

     
  • New Site: OpenElectrons

    New Site: OpenElectrons

    Ramblings July 20, 2011 06:37 5 comments

    OpenElectrons is a site created by Mindsensors to be for the Android and Arduino platforms what their Mindsensors.com site is to the Mindstorms NXT platform. Android OS and devices offer many features that are fantastic for people wanting to build an easy-to-program robot with many capabilities already built-in. Arduino is […]

     
  • Coming soon from Mindsensors

    Coming soon from Mindsensors

    NXT, Ramblings, Sensors June 30, 2011 16:05 15 comments

    NXShield for Arduino This shield is designed to fit on an Arduino. It will have 4 NXT motor ports, 4 NXT sensor ports and several RC servo motor ports. It allows you to use the I2C port on the Arduino. However it will have only a single I2C bus.  That […]

     
  • Bit Banged I2C Master on ROBOTC for Arduino

    Bit Banged I2C Master on ROBOTC for Arduino

    Arduino, ROBOTC, Sensors February 20, 2011 16:26 10 comments

    After spending two hours working on the changelog for the upcoming release of my driver suite, I thought I’d go play with something that was a bit more fun. I’m part of the ROBOTC for Arduino test group, which has been a lot of fun. The Arduino build does not […]

     
  • Fun with ROBOTC for Arduino

    Arduino, ROBOTC December 28, 2010 18:38 no comments

    Among all of the cool presents I got for Christmas this year were two new shields for my Arduino. I got a L298N Shield and a DFRobot LCD Keypad Shield. I wanted some new shields so I could write drivers for the Arduino port of ROBOTC. I found the original […]

     
  • Frankenfollower

    Arduino, ROBOTC, Robots November 21, 2010 21:28 2 comments

    Part Lego, part Arduino, part BoeBot, this is Frankenfollower. This robot was programmed in ROBOTC for Arduino, a port that is still in alpha stage of development but can be used quite nicely for programming the Arduino Duemilenova.  Other Arduino variants will be supported very soon. The Arduino port of […]