mindsensors-ps2ctrl-v4-test2.c

#pragma config(Sensor, S1,     PSPNXV4,        sensorI2CCustom)
#pragma config(Motor,  motorA,          ARMS,          tmotorNormal, PIDControl, encoder)
#pragma config(Motor,  motorB,          RIGHT,         tmotorNormal, PIDControl, encoder)
#pragma config(Motor,  motorC,          LEFT,          tmotorNormal, PIDControl, encoder)
//*!!Code automatically generated by 'ROBOTC' configuration wizard               !!*//

/*
 * $Id: mindsensors-ps2ctrl-v4-test2.c 133 2013-03-10 15:15:38Z xander $
 */

/**
 * mindsensors-ps2ctrl-v4.h provides an API for the Mindsensors PS2 controller sensor
 * with referee signal receiver.  This program demonstrates how to use that API
 *
 * Changelog:
 * - 0.1: Initial release
 *
 * Credits:
 * - Big thanks to Mindsensors for providing me with the hardware necessary to write and test this.
 *
 * License: You may use this code as you wish, provided you give credit where it's due.
 *
 * THIS CODE WILL ONLY WORK WITH ROBOTC VERSION 3.59 AND HIGHER. 

 * Xander Soldaat (xander_at_botbench.com)
 * 02 August 2012
 * version 0.1
 */

#include "drivers/mindsensors-ps2ctrl-v4.h"

task main ()
{
  ubyte counter = 0;
  ubyte oldCounter = 0;
  ubyte refSignal = 0;
  ubyte oldRefSignal = 0;
  ubyte txType = 0;
  long rawValue = 0;

  nxtDisplayCenteredTextLine(0, "Mindsensors");
  nxtDisplayCenteredBigTextLine(1, "PSP-Nx");
  nxtDisplayCenteredTextLine(3, "Test 2");
  wait1Msec(2000);

  PlaySound(soundBeepBeep);
  while(bSoundActive) EndTimeSlice();

  eraseDisplay();
  while (true)
  {
    // Get the current counter value, wraps at 255
    counter = PSPV4readRefSignalCount(PSPNXV4);

    if (oldCounter != counter)
    {
      // This is the command sent by the remote control, can be:
      // PSPV4_SIGNAL_FAST_REWIND
      // PSPV4_SIGNAL_FAST_FORWARD
      // PSPV4_SIGNAL_PLAY
      // PSPV4_SIGNAL_STOP
      refSignal =  PSPV4readRefSignal(PSPNXV4);

      // Get the transmitted type.  Not very useful in most cases unless
      // you need to know what type of transmitter sent the command
                        txType = PSPV4readRefTXType(PSPNXV4);

                        // Raw value will also "see" commands from the remote
                        // that are not recognised as "play", "stop", "forward" or "rewind".
                        // You could use this to control additional aspects of your robot!
                        rawValue = PSPV4readRawRefTXValue(PSPNXV4);

      if (oldRefSignal != refSignal)
      {
              PlaySound(soundShortBlip);
                    switch(refSignal)
                    {
                      case PSPV4_SIGNAL_FAST_REWIND:   nxtDisplayCenteredBigTextLine(3,"REWIND"); break;
                      case PSPV4_SIGNAL_FAST_FORWARD:  nxtDisplayCenteredBigTextLine(3,"FORWARD"); break;
                      case PSPV4_SIGNAL_PLAY:          nxtDisplayCenteredBigTextLine(3,"PLAY"); break;
                      case PSPV4_SIGNAL_STOP:          nxtDisplayCenteredBigTextLine(3,"STOP"); break;
                    }
                  }

                  // Always display the raw value, even if it's not one of the four
                  // referee signals.  Handy if you want to add more commands to your robot!
            nxtDisplayTextLine(6, "Type:  0x%02X", txType);
            nxtDisplayTextLine(7, "Raw:  0x%03X", rawValue);

            // Update the counters and signals
            oldCounter = counter;
            oldRefSignal = refSignal;
          }
    wait1Msec(50);
  }
}


/*
 * $Id: mindsensors-ps2ctrl-v4-test2.c 133 2013-03-10 15:15:38Z xander $
 */